TomCat Performance

TomCat Performance is the philosophy of Carolina Racing Supply epitomized in racing parts and accessories. Much as we began our business to supply racers with quality, affordable pieces, TomCat Performance is our dedication to both racers and dealers who demand an ever-increasing quality in their parts without the associated increase in price.

Those who design, create, and inspire our products are usually racers themselves and have many years of experience in their fields. By putting our products to test on short tracks across the country every week, we are able to not only demonstrate our commitment to success but also intensify it. More track time means more input on product improvements and product development.

Charlotte, North Carolina, is widely held as the center of the auto racing universe in North America and TomCat Performance is part of that community. By virtue of our proximity to and friendship with some of the top minds in NASCAR and other series, we are able to incorporate race-winning technology that the world sees on Sundays into parts and components for short track racers to use on Friday and Saturday nights.

TomCat Performance is most widely known for its vast array of quality brake and hydraulic lines for racecars and other applications. Other popular products include our weight ballast mounting clamps, J-bar assemblies, aluminum and steel tubes, starters, motor mounts, tire tools and accessories, along with numerous other "little things" like zip-ties that make working on a car that much easier.

Our TomCat Performance line is currently looking for additional dealers. For more information, tell us a little bit about yourself and your business.

Interested in finding a TomCat Performance product to fit your needs? Check back often for new products as we add them to our lineup. Our current product assortment can be found below.

Tie Wraps

Available lengths are 4", 8" and 14"
In black, blue, gray, orange, purple, red, yellow and white
Packs of 100
Racing Tape

2" x 155'
Vinyl-covered cloth tape
In black, blue, orange, purple, red, yellow and white
Steering Wheels

Available in traditional, "Super-Lite" and "Super-Grip" styles
All aluminum construction (except steel wheels)
Standard wheels available in 15" and 17"
"Super" wheels available in 15" only
Braking Components

Straight vane 8-bolt 11.75" rotors (both .810" and 1.25" thick)
Caliper brackets
Caliper and rotor bolts, accessories
Brake Lines & Plumbing

Nylon brake line kits with fittings and hose
Braided stainless steel lines with straight and elbow fittings
Brake fittings and adapters

Adjust without removing - loosen jam nuts and turn adjuster
Formed from 1-1/2" O.D. thick-wall steel tubing
3/4" rod ends
Rods & Tubes

Swaged aluminum tubes (5/8" and 3/4")
Swaged steel tubes (5/8" and 3/4")
Full line of QA1 rod ends available
Rear End Components

Full line of 9" Ford ring & pinion gear sets
9" Ford spools (full size and "mini")
Extensive selection of 10-spline quick change gears
Rear end accessories (fill cans, etc.)
Slip Yokes

Longer yokes prevent driveshaft from pulling out during increased suspension movement
Longer than stock yoke by 1-1/2" or 2-3/4"
27-Spline yoke fits most Muncie and Saginaw transmissions
Also fits Bert and Brinn transmissions
Motor Mounts

Solid steel construction throughout
Black oxide coated
Fits all small block Chevrolet motors
Sold in pre-packaged pairs
Hoodpin Kits & Accessories

Available in steel or aluminum
Scuff plates, torsion & hairpin clips, pins, nuts all available
Aluminum kits available in polished aluminum, black, blue, gold, and red
All kits include four jam nuts, two 1/2" pins, scuff plates, and torsion clips
Deluxe Weight Brackets

Precision machined aluminum
Black anodized, lightweight construction
Accepts 1/2" coarse thread bolts
Round tubing sizes - 1", 1-1/4", 1-1/2", 1-3/4", 2"
Square tubing sizes - 1-1/2", 2"
Foam Mud Plugs

Available in black, blue, orange, purple, red and yellow
Fits most 15" Wheels
5" thick
Tire Tools & Accessories

Wide variety of tire tools and accessories for dirt and asphalt
Popular pieces include aluminum stagger gauge and tire tapes, valve stems, bead breaker with foot (for use on aluminum and steel wheels), quick change lug wrench and more.
Fans & Accessories

10", 12", 14" and 16" professional-style low-amp fans
Mechanical fans in steel, aluminum, and plastic
Billet aluminum fan spacers fit 5/8" and 3/4"water pump shafts
Starters & Accessories

Mini-starter and hi-torque models available
Fits 153 or 168 tooth flywhweels
Replacement parts and accessories (heat shields, etc.) available
Aluminum Water Pumps

Lightweight with 1-3/4" lower outlet (short and long styles)
HD 3/4" bearing turned down to 5/8" shaft
Machined fan hub with dual bolt pattern
Cam stop
Carburetor and Motor Accessories

Plastic and aluminum carburetor caps
Caps fit all 4bbl Holley carburetors
Available 1" and 2" spacers fit all Holley carburetors
Valve covers, breathers, throttle stops and more
Aluminum Fuel Filters

Excellent for all racing applications
Available with paper or stainless steel elements
10" aluminum housing, anodized blue
Available to fit both AN 8 and AN 10 fuel lines
Air Cleaner Housings & Accessories

Strong stamped aluminum housings (14" diameter)
Straight-up or 1-1/2" offset available
Spacers, nuts, and other accessories
Pre-oiled 3", 4", and 5" K&N style filter elements
Full line of Outerwears pre-filters also available